Protect your store from flood damage
Inundation damage on the floor that occurs in various places is increasing due to typhoons and local guerrilla rainstorms that are becoming huge year by year .
WATAR PREVENTION
Protect your products from heavy rain disasters Automatic water stop device for stores
design· Drafting planning
The water pressure on the inundation prevention device varies depending on the rise in water level and the value of the area.
Therefore, we will guide you to the design by simulating the water pressure calculation due to the rise in the water level of sewage, the automatic drawing door at each location, and the drafting planning according to the dimensions of the hinged door.
Protect store products after the disaster
Automatic water stop device for stores
SDGs13: Participated as a section of heavy rain disaster [countermeasure plan] due to the influence of climate change.
After the area is damaged by heavy rain, it may take time for external support due to infrastructure problems.
Those affected by the disaster are required to purchase food, daily necessities, or prescriptions from nearby convenience stores, markets, dispensing pharmacies, etc.
However, if the water level of convenience stores, markets, and dispensing pharmacies rises due to a heavy rain disaster and sewage such as sewage invades the store, the box-shaped showcase refrigerator and reach-in freezer (under the refrigerator) will be submerged and cause a malfunction. On the side, it is difficult to sell for hygiene, and people affected by the disaster cannot buy it and are in distress. The developed [Automatic water stop device for stores] was devised and developed so that it can protect the store and provide local people with food, daily necessities, prescriptions, etc. stored in the store.
Engineering and management
The construction is an automatic self-supporting flood prevention device, so it is necessary to install in stores and factories.
Basically no processing is done. All you have to do is bury the wireless floating system and circular housing in the ground, caulk between the left and right columns of the inundation prevention device unit and the door frame or outer wall of the store, and install the ground and pedestal. Special anchor bolts are driven into the four corners and center of the pedestal of the unit to fix the pedestal unit, and to prevent tripping, the slope is bolted to the pedestal between the pedestal and the ground inside and outside the store.
Finally, a small hole was made in a part of the store above the flooded water level (waterproofing), and the control box installed in the store was wired, and the inspection box for the sewer pipe was lightweight and considered drainage resistance. The check valve is installed and the construction is completed.
Management: Maintenance is inspected once a year on a regular basis.
The above video of [Automatic water stop device for stores] was taken in front of our warehouse. Anchor bolts are not placed on the floor. In addition, slopes will be attached to existing stores.
Also, in the above video, a wireless floating system is installed in an acrylic aquarium and water is poured.
In the above video of the prototype of [Automatic water stop device for stores], the water in the acrylic glass is drained from the start line of the wireless floating system and the water stop plate is lowered. The original installation of the wireless floating system is to make a pilot hole of 100Φ in a vacant lot or parking lot of a store with a core drill, fix the cylindrical housing and the wireless floating system, install it on the ground, allow sewage to permeate naturally, and lower the waterstop. The system.
.jpg)
We have [adaptation measures] for specific measures against climate change of SDGs Goal13.
・ Heavy rain disaster countermeasures [Automatic water stop device for stores]
・ Evacuation measures in the event of a disaster [Emergency evacuation air bed]
"We participate in the Sustainable Development Goals (SDGs)."
National highway No. 261 in Inbara, Kawamoto-cho, Shimane Prefecture, where suburban stores gather near the river, was flooded on the 15th, and rainwater also infiltrated drug stores and home centers, and some stores were temporary on both the 15th and 16th. After taking a leave of absence, I was forced to clean up afterwards, which affected the shopping of residents. Again, measures against inland water in the surrounding area became an issue. * San-in Chuo Daily Digital
Product Summary
■ Automatic water stop device for stores
Automatic water stop device that operates even unattended and stops water
Overview of inundation prevention devices for stores, factories, and underground openings: Our unique floating system, which can be used both automatically and manually, has a rainwater infiltration basin housing that covers the floating system if there is no height difference from the ground. When the water level drops due to natural infiltration of sewage at the bottom of the water, the wireless floating system detects it and the double-folded waterstop automatically settles on the original pedestal. The pedestal has a groove for draining sewage. * If there is dust, it is necessary to remove it.
If the penetration of the ground slows down, it is possible to lower the waterstop with a manual switch. When the water level (including sewage) rises due to floods, etc., the geared motor provided on the column raises the waterstop to a fixed position, and depending on the power output, an electromagnet or a powerful neodium magnet continues. The stainless steel plate operates forward to strongly pull the waterstop plate into close contact and completely stop the water. The bottom of the waterstop is a two-layered waterstop that halves the storage space, and its shape is usually used as a store passage and does not spoil the aesthetics of the store. The left and right columns and pedestal are integrated (unit), and installation is completed within 1 hour.
Waterstop: Vertical dimensions 60 cm to 90 cm (usually 30 cm to 45 cm)
Width dimension 160 cm to 180 cm * Aluminum honeycomb plate thickness is
Since the size changes depending on the water pressure, the height of the pedestal also changes.
I will.
Store construction: The pedestal is fixed at 5 points with special anchor bolts, and the left and right columns are caulked to prevent water leakage from the door frame and completed with simple construction.
A control box and a portable storage battery will be installed in the room, so you can rest assured that it will operate even in the event of a power outage.
Wireless floating system: Outside the store, asphalt, concrete, and ground are excavated with a core drill, a housing with the wireless floating system fixed is buried, water is added, operation is confirmed, and construction is completed.
* A portable storage battery is attached according to the startup output.
* A check valve for sewer pipes is included.
* Patent applied
Photo dimensions: Width 163 cm x Height at startup 60 cm (usually 30 cm)
And 2 models with width 163 cm x height 90 cm at startup (usually 45 cm)
The illustration on the left [Automatic water stop device for stores] is for a new store.
If the pedestal range for accommodating the pedestal is excavated to a depth of 30 mm in advance,
The passage will be flat.
In addition, the illustration of [Automatic water stop device for stores] on the right is used for existing stores. Since there will be a step between the pedestal and the floor, a slope will be attached, so there will be no hindrance to the aisle.
Please see the photo on the left.
The pedestal uses a steel plate of SS400 x 4.5 mm thickness. The water stop device is firmly fixed by the bending strength and the plate thickness.
In addition, the columns are SS400 and use steel plates with a thickness of 9 mm. It is bent into an L shape and has a plate thickness of 9 mm, considering deformation due to running water pressure.
The above photo shows the experimental photo of the automatic water stop device for stores.
Image diagram and experimental photo of automatic water stop device for stores
.jpg)
Product Summary
Air bed for emergency evacuation
.jpg)
.jpg)
■ Air bed for emergency evacuation
We have specialized in evacuation measures in the event of a disaster with the adaptation measures of SDGs [Adaptation measures for specific measures against climate change] The emergency evacuation air bed is lightweight at about 1.1 kg and is convenient to carry. The bag itself becomes a pillow when inflated, and it is a semi-double size so that you can sleep with small children, so that you can sleep comfortably even a little when evacuating, so that it can be used on hard floors and hard cardboard beds. We are making it with some ingenuity. Non-woven fabric that quickly absorbs water and sweat is used on the entire surface of the bag (pillow) and on one side of the air bed.
Size: Semi-double Thickness when expanded 160 mm Color: Gray
* An inflator is attached to the single item.
Air feeding time 1 set / about 10 minutes
* 100set comes with an electric air compressor.
* Patent applied
inquiry
inquiry
Please use this form to contact us:
Soki Co., Ltd.
〒422-8046
1007-1 Nakajima, Suruga-ku, Shizuoka-shi, Shizuoka
Tel: 054-287-5207
Fax: 054-287-5205
Employment information
For 2021 entries, please email your resume to this address:
● Heavy equipment operator: Makinohara branch
● Experienced in installing solar power generation: Makinohara Branch
Name of general affairs officer Ueda
MAIL: t.ueda@souk1.co.jp
Inquiries by phone: 0120-358-122